Need to order the Minimum of 15pcs each product !
<p>Lynx Heli Innovations has redesigned the standard 130 X plastic tail servo support, using aluminum alloy.</p>
<p>We designed a single X shaped plate that supports the tail servo  perfectly. Like any Lynx part we aim for the strongest part with the  lightest weight. We always look for upgrades that will not compromise  helicopter performance.</p>
<p>The details and design of this tail servo support add top performance and an exotic look to your 130X tail system.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement for the standard 130 X tail parts.</p>
<p>- Optimized tail servo support protecting the servo board</p>
<p>- Increased rigidity of the tail servo improving tail system performance.</p>
<p>- FEA (Final Elements Analysis) design assistance, achieving the lightest weight with the maximum strength.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Tail servo support material: Aluminum 7075-T6 – red anodized finish.</p>
<p>- Screw material: Carbon steel plated</p>
<p>- Tail case assembled weight: 1.35g</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x CNC 130X tail servo support</p>
<p>4 x M1.2x4 Pan head screws</p>
<p>2 x M1.2x6 Pan head screws</p>

Stock : 4 pcs
  $8.75 $17.50

Qty:  
<p>Lynx has defined specific Carbon Steel Slant Pinions for the Gaui X3.</p>
<p>Our pinions are made with high-tensile strength carbon steel followed  by heat treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Slant Pinion 14T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>1 x Slant Pinion 14T Mod. 0.6 - 3.5 mm Motor Shaft</p>
<p>2 x Set Screw M3x3</p>
<p>Lynx Heli Innovations offer Servo Gear Spare Bag Set as spare bag for <strong>Lynx Servo DS-883 and DS-883-HV.</strong></p>

Stock : 52 pcs
  $5.25 $10.50

Qty:  
<p>Lynx Heli Innovations proposes a Carbon Fiber Tail Push Rod for your GAUI X3.</p>
<p><strong>IMPORTANTR NOTE: <span style="text-decoration: underline;">This GAUI X3 Tail Push Rod was designed over the GAUI X3 Belt conversion, will not work on Torque Tube transmission.</span></strong></p>
<p>The tail servo push rod is one of the most important tail parts in any RC Heli.  Lynx has responded to pilots request’s to produce a professional quality tail servo push rod in carbon fiber.</p>
<p>We design also a special POM CNC Tail Push Rod Support included on this bag.</p>
<p>Our tail push rod comes preassembled and gives you the possibility of fine-tuning the tail setup thanks a treaded linkage system.</p>
<p>Once again Lynx Heli Innovations has set a new standard with professional and dedicated upgrades for your heli.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement for STD GAUI X3 – Belt Edition</p>
<p>- Stiff and rigid for the best  precise Tail response</p>
<p>- Easy and quick installation thanks Lynx design</p>
<p>- FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>- Tail Push Rod Material: Carbon Fiber Rod</p>
<p>- Hardware Material: Carbon Steel 12.9 Class</p>
<p>- Linkage and Terminals Material: Aluminum CNC - Black</p>
<p>- Weight (including screw): 3.2g</p>
<p> </p>
<p>PACKING LIST:                                        </p>
<p>1 x GAUI X3 - Tail Push Rod Carbon - Factory pre-assembled</p>
<p>1 x GAUI X3 – POM CNC Tail Push Rod Support</p>

Stock : 2 pcs
  $6.88 $13.75

Qty:  
<p>Lynx Heli Innovations is always looking toward new ideas and solutions. If you enjoy the feel of DFC, we have just the thing for your Gaui X3 – our all new DFC conversion set.</p>
<p>The Lynx Gaui X3 DFC Conversion Set is designed to work with Lynx Gaui x3 Ultra Main Grips, just need install the DFC rods on Lynx Ultra Main Grip.</p>
<p>Lynx Gaui X3 DFC Conversion Set includes a set of Lynx Gaui X3 ultra-dampeners to emphasize the rigid head characteristics typical of DFC systems.</p>
<p>This head system is designed for those who love the Gaui X3 and love flying with a high head speed. Our head gives the Gaui X3 an incredibly precise and crisp feel in flight – even during the most demanding maneuvers.</p>
<p>The DFC linkage thread rod has been designed to be “sacrificial” and easy replaceable in the event of a hard crash.</p>
<p> </p>
<p>FEATURES:</p>
<p>- DFC system upgrade for your Gaui X3</p>
<p>- Optimized lightweight design.</p>
<p>- Rigid and precise flight control.</p>
<p>- Direct replacement for standard Gaui X3 parts</p>
<p>- Special features allow easy repair even after a hard crash.</p>
<p>- Design assisted by FEA (Finite Element Analysis) to achieve light weight and maximum strength.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Gaui X3 DFC Rod material: Aluminum 7075-T6 – anodized finish</p>
<p>- Gaui X3 DFC Thread Rod material: Carbon steel</p>
<p>- Bearing material: Chrome steel alloy – ABEC 5 precision class – manufactured in Japan</p>
<p>- Hardware material: Carbon steel</p>
<p> </p>
<p> PACKING LIST:</p>
<p>2 x Gaui X3 – DFC Rod – Black Color</p>
<p>2 x Gaui X3 - Lynx Ultra Dampeners</p>

Stock : 4 pcs
  $11.97 $23.95

Qty:  
<p>The 300 X/CFX is an amazing 300 class RTF helicopter. Lynx has looked closely at the helicopter’s performance, and we have found a number of areas for improvement. One issue we noted was the standard heli Tail Boom Clamp.</p>
<p>These parts originally in plastic can’t clamp the boom as need, than vibe or tail wag can upend, reducing the tail system performance.</p>
<p>Lynx Heli Innovations has redesigned the standard 300 X/CFX plastic tail boom clamp, using aluminum alloy.</p>
<p>We designed a clamp that once installed will lock perfectly the boom making the tail system “rock-solid”. Like any Lynx part we aim for the strongest part with the lightest weight. We always look for upgrades that will not compromise helicopter performance.</p>
<p>The details and design of this tail servo mount add top performance and an exotic look to your 300 X/CFX tail system.</p>
<p> FEATURES:</p>
<p>- Direct replacement for the standard 300 X/CFX tail parts.</p>
<p>- Optimized tail boom support for a “rock solid” clamp.</p>
<p>- Increased rigidity of the tail system improving tail performance reducing wag and vibes.</p>
<p>- FEA (Final Elements Analysis) design assistance, achieving the lightest weight with the maximum strength.</p>
<p> </p>
<p> TECHNICAL SPECIFICATIONS:</p>
<p>- Tail Boom Clamp Material: Aluminum 7075-T6 – Silver anodized finish.</p>
<p>- Screw material: Carbon steel 12.9 class</p>
<p>- Assembled weight (including hardware): 1.74g</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x CNC 300X/CFX Tail Boom Clamp</p>
<p>3 x M2x6 Hex Cup Screw</p>

Stock : 5 pcs
  $4.99 $9.99

Qty:  
<p>Lynx Heli Innovations have re-designed the vertical fin. Using   specialized airflow analysis software (the very same software we used   for the highly popular Lynx Turbo Fan), we have found that the airflow   efficiency of a standard stock fin could be greatly improved. Our new   design not only looks better, but also provides functional benefits in   flight.</p>
<p> </p>
<p>FEATURES:</p>
<p>- The vertical fin surface area is smaller when compared to standard   vertical fin shapes, offering less air drag, less airflow turbulence,   and greater tail rotor efficiency & performance.</p>
<p>- The fin position is moved forward, so is less obstructive to tail rotor airflow, increasing tail efficiency.</p>
<p>- Material:  3K Carbon Fiber – 1 mm thick</p>
<p>- Weight: 2g</p>
<p> </p>
<p>PACKING LISTS:</p>
<p>1 x Gaui X2 Vertical Fin - Profile 1</p>
<p>1 x Gaui X2 Horizontal Fin - Profile 1</p>

Stock : 2 pcs
  $1.38 $2.75

Qty:  
<p>ynx Heli Innovations offer a spare parts for Lynx GAUI X3 Stretch Kit:</p>
<p>LX1663 - Gaui X3 - 380mm Stretch Kit Combo</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x GAUI X3 – Stretch Tail Boom Support.</p>

Stock : 2 pcs
  $6.88 $13.75

Qty:  
<p>Lynx Heli Innovations is always looking toward new ideas and solutions. If you enjoy the feel of DFC, we have just the thing for your Gaui X3 – our all new DFC conversion set.</p>
<p>The Lynx Gaui X3 DFC Conversion Set is designed to work with Lynx Gaui x3 Ultra Main Grips, just need install the DFC rods on Lynx Ultra Main Grip.</p>
<p>Lynx Gaui X3 DFC Conversion Set includes a set of Lynx Gaui X3 ultra-dampeners to emphasize the rigid head characteristics typical of DFC systems.</p>
<p>This head system is designed for those who love the Gaui X3 and love flying with a high head speed. Our head gives the Gaui X3 an incredibly precise and crisp feel in flight – even during the most demanding maneuvers.</p>
<p>The DFC linkage thread rod has been designed to be “sacrificial” and easy replaceable in the event of a hard crash.</p>
<p> </p>
<p>FEATURES:</p>
<p>- DFC system upgrade for your Gaui X3</p>
<p>- Optimized lightweight design.</p>
<p>- Rigid and precise flight control.</p>
<p>- Direct replacement for standard Gaui X3 parts</p>
<p>- Special features allow easy repair even after a hard crash.</p>
<p>- Design assisted by FEA (Finite Element Analysis) to achieve light weight and maximum strength.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Gaui X3 DFC Rod material: Aluminum 7075-T6 – anodized finish</p>
<p>- Gaui X3 DFC Thread Rod material: Carbon steel</p>
<p>- Bearing material: Chrome steel alloy – ABEC 5 precision class – manufactured in Japan</p>
<p>- Hardware material: Carbon steel</p>
<p> </p>
<p> PACKING LIST:</p>
<p>2 x Gaui X3 – DFC Rod – Red Color</p>
<p>2 x Gaui X3 - Lynx Ultra Dampeners</p>

Stock : 1 pcs
  $11.97 $23.95

Qty:  
<p>Lynx Heli Innovations offer a spare parts for Lynx GAUI X3 Stretch Kit:</p>
<p>LX1663 - Gaui X3 - 380mm Stretch Kit Combo</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x GAUI X3 - Stretch Tail Boom – Carbon Fiber – Belt Edition</p>
<pre><br /></pre>

Stock : 7 pcs
  $6.38 $12.75

Qty:  
<p>Lynx Heli Innovations reinforced GAUI X3 Carbon Fiber Ultra Tail Boom is now available and ready for action!</p>
<p><strong>IMPORTANTR NOTE: <span style="text-decoration: underline;">This GAUI X3 Carbon Fiber Tail Boom was designed over the GAUI X3 Belt conversion, will not work on Torque Tube transmission.</span></strong></p>
<p>Available in two lenght - standard and stretch to use with Lynx Stretch kit.</p>
<p>We designed and produced this new high quality Carbon Fiber and epoxy tail boom to be ultra-strong and stiff; with the outer dimension like the standard boom for perfect fitment without modification.  However, we reinforced the inner wall thickness making it incredibly stiff. This extra stiffness will help eliminate any last tail vibes without any added weight over the standard aluminum boom.</p>
<p>Major benefits in tail performance and vibration suppression but will also amaze you with its superior crash resistance.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement for your standard length GAUI X3 tail boom – Belt Edition</p>
<p>- Comparable weight to a standard aluminum boom but incredibly stronger and stiffer.</p>
<p>- Sleek modern aggressive look.</p>
<p>- Increased tail rigidity gives precise and crisp feeling flights with standard tail rotors.</p>
<p>- Superior crash resilience.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>- Tail Boom Material: Pure 3K Carbon Fiber OEM Lynx</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x GAUI X3 - Carbon Fiber Ultra Tail Boom – Standard Length – Belt Edition</p>

Stock : 10 pcs
  $6.38 $12.75

Qty:  
<p>Lynx Heli Innovations offer a spare parts for Lynx GAUI X3 Stretch Kit:</p>
<p>LX1663 - Gaui X3 - 380mm Stretch Kit Combo</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x GAUI X3 - Stretch Tail Belt</p>

Stock : 12 pcs
  $3.98 $7.95

Qty:  
<p>Slant! Slant! Slant!</p>
<p>Finally available for your TSA 600E and TSA 700E  the helicoidally “Slant” Main transmission system.</p>
<p>Designed under precise request of our BEST friend Tareq Alsaadi this new CNC slant main gear system will amaze you.</p>
<p>Tareq , the King of 3D have special needs, his crazy fast move stress the heli as nobody can.</p>
<p>Our Main Gear design goal was satisfy Tareq need: reduce transmission   noise, increase the resistance and combine those specifications with   the best quality and fine tolerance part.</p>
<p>By combining our engineering and helicopter experience we have   designed special Slant Main Gear that answer to our entire design   request and future more is 100% compatible with std. heli parts.</p>
<p>We offer Slant Main Gear for TSA 600E and TSA 700E, single parts and   combo with pinion to help you to switch form std to slant system.</p>
<p>Lynx Slant Main Gear are produced by CNC operation, using a   techno-polymer material with auto-lube features to assure maximum load   and friction resistance.</p>
<p>Pinions are made with same CNC process form solid Carbon Steel rod   and later Hardened to 45 / 50 HRC to assure the best resistance.</p>
<p>The difference is visible from the first Main Gear revolution, in air   you will not recognize your heli anymore, it sound will be just  amazing  silent and smooth.</p>
<p>Tareq test and approved Lynx slant system in his TSA heli.</p>
<p> </p>
<p>FEATURES:</p>
<p>-        Silent transmission</p>
<p>-        More 30% Thoth contact and increased module increase max. resistance.</p>
<p>-        Smooth and Vibes reduction, increase the FBL control and heli fly precision.</p>
<p>-        Incredible spam life resistance.</p>
<p>-        Direct replacement for your TSA 600E or TSA700E heli. (check the specific description requirement)</p>
<p>-        Dedicated Lynx Slant Pinion are request for the normal assembly.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>-         Main Gear Material:  Techno-Polymer base POM.</p>
<p>-         Pinion Material: Hardened Carbon Steel 45/50 HRC</p>
<p>-         Slant Module: 1mm</p>
<p>-         Number of Thoth: 120T x TSA 600E – 124T x TSA 700E</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x TSA 600-700E CArbon Steel 14T Slant Pinion</p>
<p>Slant! Slant! Slant!</p>
<p>Finally available for your TSA 600E and TSA 700E  the helicoidally “Slant” Main transmission system.</p>
<p>Designed under precise request of our BEST friend Tareq Alsaadi this new CNC slant main gear system will amaze you.</p>
<p>Tareq , the King of 3D have special needs, his crazy fast move stress the heli as nobody can.</p>
<p>Our Main Gear design goal was satisfy Tareq need: reduce transmission   noise, increase the resistance and combine those specifications with   the best quality and fine tolerance part.</p>
<p>By combining our engineering and helicopter experience we have   designed special Slant Main Gear that answer to our entire design   request and future more is 100% compatible with std. heli parts.</p>
<p>We offer Slant Main Gear for TSA 600E and TSA 700E, single parts and   combo with pinion to help you to switch form std to slant system.</p>
<p>Lynx Slant Main Gear are produced by CNC operation, using a   techno-polymer material with auto-lube features to assure maximum load   and friction resistance.</p>
<p>Pinions are made with same CNC process form solid Carbon Steel rod   and later Hardened to 45 / 50 HRC to assure the best resistance.</p>
<p>The difference is visible from the first Main Gear revolution, in air   you will not recognize your heli anymore, it sound will be just  amazing  silent and smooth.</p>
<p>Tareq test and approved Lynx slant system in his TSA heli.</p>
<p> </p>
<p>FEATURES:</p>
<p>-        Silent transmission</p>
<p>-        More 30% Thoth contact and increased module increase max. resistance.</p>
<p>-        Smooth and Vibes reduction, increase the FBL control and heli fly precision.</p>
<p>-        Incredible spam life resistance.</p>
<p>-        Direct replacement for your TSA 600E or TSA700E heli. (check the specific description requirement)</p>
<p>-        Dedicated Lynx Slant Pinion are request for the normal assembly.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>-         Main Gear Material:  Techno-Polymer base POM.</p>
<p>-         Pinion Material: Hardened Carbon Steel 45/50 HRC</p>
<p>-         Slant Module: 1mm</p>
<p>-         Number of Thoth: 120T x TSA 600E – 124T x TSA 700E</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x TSA 600E - Slant Main Gear 120T</p>

Stock : 10 pcs
  $11.75 $23.50

Qty:  
<p>Lynx define OEM Hard Steel Slant Pinion for T-Rex 500</p>
<p>Our pinions are made with high-tensile stretch carbon steel followed  by thermal treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>-         1 x Slant Pinion 11T Mod. 0.7 - 5mm Motor Shaft</p>
<p>-         2 x Set Screw M3x3</p>

Stock : 3 pcs
  $3.52 $7.05

Qty:  
<p>Lynx has defined OEM spec Carbon Steel Slant Pinions for the Gaui X3.</p>
<p>Our pinions are made with high-tensile strength carbon steel followed by heat treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Slant Pinion 11T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>1 x Slant Pinion 12T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>1 x Slant Pinion 13T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>3 x Set Screw M3x3</p>
<p>Lynx has defined OEM spec Carbon Steel Slant Pinions for the Gaui X3.</p>
<p>Our pinions are made with high-tensile strength carbon steel followed by heat treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Slant Pinion 11T Mod. 0.6 - 3.5 mm Motor Shaft</p>
<p>1 x Slant Pinion 12T Mod. 0.6 - 3.5 mm Motor Shaft</p>
<p>1 x Slant Pinion 13T Mod. 0.6 - 3.5 mm Motor Shaft</p>
<p>3 x Set Screw M3x3</p>
<p><strong>U</strong><strong>sed for:</strong>  M2.5 Frame Screw</p>
<p><strong>Material:</strong> High Precision Tolerance CNC Part made with Aluminum 7075T6</p>
<p><strong>Include:</strong></p>
<p>20 x Frame C Washer M2.5 – Green</p>

Stock : 16 pcs
  $2.80 $5.60

Qty:  
<p><strong>LX0021 - Futaba 6-7-9 Radio arm Balancer set</strong></p>
<p><strong>Material:</strong></p>
<p>High Precision Tollerance CNC Part made with Aluminum 7075T6</p>
<p><strong>Bag Contents:</strong></p>
<p>1 x F6-7-9 - arm</p>
<p>1 x screw M6.5<strong><br /></strong></p>
<div id="_mcePaste" style="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow: hidden;">
<h1>LX0021 - Futaba 6-7-9 Radio arm Balancer set</h1>
</div>

Stock : 50 pcs
  $10.25 $20.50

Qty:  
<p><span style="font-family: arial,helvetica,sans-serif;"><span style="font-size: small;">LX0117 - Rod Key 3.25mm for All Rods</span></span></p>
<p><span style="font-family: arial,helvetica,sans-serif;"><span style="font-size: small;">Specifically for all Titanium rods</span></span></p>

Stock : 34 pcs
  $1.60 $3.20

Qty:  

Displaying 1 to 20 (of 434 specials) Result Pages:  1  2  3  4  5 ...  [Next >>] 

Categories...

Joomla Templates and Joomla Extensions by JoomlaVision.Com