Need to order the Minimum of 15pcs each product !
<p>Lynx EOX brushless motors a new generation of high power, high efficiency helicopter motors.</p>
<p>Our new EOX motors will open your eyes to performance.</p>
<p>Developed by Lynx, these motors are perhaps the ultimate helicopter upgrade.</p>
<p>Featuring a single wire coil assembly for the best in efficiency, power and cool running.</p>
<p>High temperature rating Neodymium magnet and high quality material and component graduate EOX motor by Lynx a Limit Edition.</p>
<p>The EOX-2222 motor is the ultimate powerhouse for 450 class heli. The 6S-1970KV edition is designed to increase the Max Output Power and work with 6S.</p>
<p>The high quality of all components and material used, as the choice  of a special single wire rewind system grade this motor as a Limited  Edition </p>
<p>We introduce 3 Radial Bearign shaft supportand 100% Factory fine  motor balancing for the ultimate motor consistency and vibe free.</p>
<p>Overall dimension was designed to fit in the standard frame without touch battery or servo.</p>
<p>EOX 2222 is sale with standard cable connector plugs.</p>
<p>So the next time you want to upgrade your helicopter – think Lynx EOX!</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<table style="width: 373px; height: 352px;" border="0" cellspacing="0" cellpadding="0">
<colgroup><col width="161"></col> <col width="160"></col> </colgroup> 
<tbody>
<tr height="20">
<td class="xl68" width="161" height="20">Motor Kv</td>
<td class="xl67" width="160">1970KV</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Max Lipo   Cell</td>
<td class="xl65" width="160">6s  (22.2 MAX INPUT VOLT)</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Stator   Diameter</td>
<td class="xl67" width="160">22 mm</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Stator   Length</td>
<td class="xl65" width="160">22 mm</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">No. of   Stator Arms</td>
<td class="xl67" width="160">9</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">No.   Magnet Poles</td>
<td class="xl65" width="160">6</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Single   Wire Diam.</td>
<td class="xl67" width="160">0.40 mm</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Max   Continuous Current</td>
<td class="xl65" width="160">40A</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Max   Continuous Power</td>
<td class="xl67" width="160">870W</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Weight</td>
<td class="xl65" width="160">81g - with wire and pin</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Outside   Diameter</td>
<td class="xl67" width="160">28 mm</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Body   Length</td>
<td class="xl65" width="160">30.3 mm</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Shaft   Diameter</td>
<td class="xl67" width="160">4mm - 3 Bearign Support</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Pinion   Shaft Diameter</td>
<td class="xl65" width="160">3,17 mm - With Lock Surface</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Overall   Shaft Length</td>
<td class="xl67" width="160">55 mm</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Motor   Timing</td>
<td class="xl65" width="160">5deg</td>
</tr>
<tr height="20">
<td class="xl69" width="161" height="20">Drive   Frequency</td>
<td class="xl70" width="160">8kHz</td>
</tr>
</tbody>
</table>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x EOX 2222-6S-1970KV Motor with preinstalled conector plug</p>
<p>4 x Hex Cup Screw M3x5</p>
<p>4 x Hex Cup Screw M3x8</p>

Stock : 14 pcs
  $29.99 $55.50

Qty:  
<div class="product_desc_wrapper">
<p>We offer a perfect match spare bag for Oxy4 Helicopter :</p>
<p> </p>
<p> PACKING LIST:</p>
<p> 1 x  OXY4 - Fiber Glass  Canopy Schema #5 and Landing Gear Orange</p>
</div>

Stock : 0 pcs
  $37.72 $40.05

Qty:  
<div class="product_desc_wrapper">
<p>Lynx  / Oxy offer Canopy for OXY 4 Heli Kit</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x OXY4 - Canopy Shema #3</p>
<p> </p>
</div>

Stock : 4 pcs
  $33.52 $37.15

Qty:  
<p>We offer a perfect match spare bag for Oxy4 Helicopter :</p>
<p> </p>
<p> PACKING LIST:</p>
<p> 1 x  OXY4 - Fiber Glass  Canopy Schema #8 and landing gear Orange</p>

Stock : 1 pcs
  $37.72 $40.05

Qty:  
<p>The 450X is an amazing 450 class RTF helicopter. Lynx has looked closely at the helicopter’s performance, and we have found a number of areas for improvement. One issue we noted was the standard motor becomes very hot while flying. Our solution has been to design a special motor mount with integrated heat sink to optimize the efficacy of motor cooling. Dedicated ribs placed were the air flow is greatest assure superior thermal exchange.</p>
<p>Lynx has also been listening to pilot requests for a more powerful motor upgrade. Current compatible motors have a lower KV than the standard motor so it is necessary to move the motor to allow the use of a larger pinion. Our motor mount has the following features:</p>
<p>-        Improved cooling to help the motor run cooler leading to better performance and stable power.</p>
<p>-        Special double motor adjustment (frame position as normal and additionally adjustment in the motor plate) – this allows the installation of 15 tooth pinions.</p>
<p>-        Special asymmetrical design to give a large window for oversize motor wires.</p>
<p>-        Unique and stylish Lynx design</p>
<p>-        100% compatible replacement for the standard 450X motor mount</p>
<p>-        Thermal analysis software interfaced with FEA (final elements analysis) assisted design for the best compromise of design weight, and thermal dissipation efficiently.</p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Motor heat sink material: Aluminum 6061-T6 – Silver anodized finish</p>
<p>- Hardware material: Carbon steel class 12.9</p>
<p>PACKING LIST:</p>
<p>- 1 x 450X CNC motor heat sink mount </p>
<p>- 4 x Hex cap screw M2.5x8</p>
<p>- 4 x Frame C washer 2.5mm - silver color</p>
<p>- 2 x Button head cap screw M3x8</p>

Stock : 4 pcs
  $8.39 $12.23

Qty:  
<p>Lynx Heli Innovations has redesigned and improved the standard 130X    plastic swash plate using a combination of 7075 aluminum alloy. We introduce a replaceable low friction copolymer    spherical  swivel bearing and robust stainless steel linkage balls that    comes  fully assembled and ready to fly/plug and play.</p>
<p>Micro RC helicopter upgrades can be a trap; they need to do more than     just look nice, they should add functionality and/or improve     performance, not just add weight.</p>
<p>We work tirelessly to optimize our designs and perform flight-testing     to achieve the desired benefits with a final weight and design     specification without compromise.  We are pilots, and we demand upgrades     that truly deliver increased performance with the lightest weight     possible.</p>
<p>Lynx Heli Innovations is proud to introduce our own in house design     Spherical Swivel Bearing assembly that allows the swash plate to pivot     around the main shaft better than ever!  Thanks to our experience  and    our desire to for better solutions, we have created a new  Spherical    Bearing bushing from a low friction copolymer to ensure an  incredibly    smooth, solid and precise swivel action while eliminating  looseness    between the ball and bushing for drastic elimination of any  free play.</p>
<p>The Spherical Bearing assembly is now replaceable/serviceable by the     customer.  It is composed of a 7075 aluminum alloy center ball and a    low  friction copolymer bushing surrounding the center ball.  These    small  parts are produced by Lynx and factory assembled to become the    heart of  the Lynx Swash Plate.</p>
<p>For those who push the limits and fly beyond them, this swash plate     was designed to be almost completely rebuild-able by the customer.      Offering an economic service parts bag, you will be able to follow the     simple instructions and replace the parts most prone to wear, the     Spherical Bearing assembly and the linkage balls.  (The large center     ball bearing is pre-lubricated and permanently mated to the housings and     the center is press fit to ensure a long life.)</p>
<p>Thanks to our hard work and rigorous design specifications, the Lynx 130X Swash Plate results in an incredibly strong  and    virtually indestructible part weighting only 3.4 grams</p>
<p>This improvement was possible thanks the special Spherical Bearing Lynx System.</p>
<p>Attention to detail and design combined with material strength,     durability, precise CNC tolerances, fit and finish and most important     lightweight all contribute to the added precision and the ability for     the customer to rebuild, which ensures the best possible performance     flight after flight for the 130X.</p>
<p>The new Lynx Swash Plate of course looks great, but it  also    has the benefits and performance increase to match!  Lynx Ultra  Swash    Plates are the next level in lightweight, precision and  rebuild-able    swash plates.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct fit replacement part for the standard 130X plastic swash plate.</p>
<p>- Innovative in house designed ultra precise Spherical Bearing for a smooth and solid swivel action.</p>
<p>- Stainless Steel linkage balls for the best wear and shock resistance.</p>
<p>- High quality ABEC5 Stainless Steel radial ball bearing for maximum precision and durability.</p>
<p>- Customer rebuild-able Swash Plate from service parts bag.</p>
<p>- Factory assembled with thread lock on linkage balls and pre-lubricated bearing.</p>
<p>- FEA (Final Elements Analysis) used in achieving the most lightweight part with maximum strength.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>- Swash Plate Material: SST</p>
<p>- Linkage Ball Material: SST</p>
<p>- Ball Bearing Material: SST – ABEC5 precision class</p>
<p>- Assembled weight: 3.4gr</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x 130X - Swash Plate  , Silver - Factory assembled, ready to fly/plug and play</p>
<p> </p>
<p>SERVICE BAG:</p>
<p><a href="http://www.lynxheli.com/product_info.php?cPath=128_119&products_id=22673">LX0379 - 130 X - Lynx Swash Plate Service Bag</a></p>

Stock : 3 pcs
  $13.99 $28.43

Qty:  
<p>Lynx EOX brushless motors a new generation of high power, high efficiency helicopter motors.</p>
<p>Our new EOX motors will open your eyes to performance.</p>
<p>Developed by Lynx, these motors are perhaps the ultimate helicopter upgrade.</p>
<p>Featuring a single wire coil assembly for the best in efficiency, power and cool running.</p>
<p>High temperature rating Neodymium magnet and high quality material and component graduate EOX motor by Lynx a Limit Edition.</p>
<p>The EOX-2214 - V2 motor is the ultimate powerhouse for your 300X. The V2 edition is designed to increase the Max Output Power and work with 3S and 4S.</p>
<p>The high quality of all components and material used, as the choice of a special single wire rewind system grade this motor as a Limited Edition </p>
<p>We introduce 3 Radial Bearign shaft supportand 100% Factory fine motor balancing for the ultimate motor consistency and vibe free.</p>
<p>Overall dimension was designed to fit in the standard 300X frame without touch battery or servo.</p>
<p>EOX 2214 - V2 is sale with standard 300X cable connector plugs.</p>
<p>So the next time you want to upgrade your helicopter – think Lynx EOX!</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<table style="width: 373px; height: 352px;" border="0" cellspacing="0" cellpadding="0">
<colgroup><col width="161"></col> <col width="160"></col> </colgroup> 
<tbody>
<tr height="20">
<td class="xl68" width="161" height="20">Motor Kv</td>
<td class="xl67" width="160">4100KV</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Max Lipo   Cell</td>
<td class="xl65" width="160">4s  (16.8 MAX INPUT VOLT)</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Stator   Diameter</td>
<td class="xl67" width="160">22 mm</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Stator   Length</td>
<td class="xl65" width="160">14 mm</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">No. of   Stator Arms</td>
<td class="xl67" width="160">9</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">No.   Magnet Poles</td>
<td class="xl65" width="160">6</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Single   Wire Diam.</td>
<td class="xl67" width="160">0.35 mm</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Max   Continuous Current</td>
<td class="xl65" width="160">35A</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Max   Continuous Power</td>
<td class="xl67" width="160">545W</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Weight</td>
<td class="xl65" width="160">61.5g - with wire and pin</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Outside   Diameter</td>
<td class="xl67" width="160">28 mm</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Body   Length</td>
<td class="xl65" width="160">22.3 mm</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Shaft   Diameter</td>
<td class="xl67" width="160">4mm - 3 Bearign Support</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Pinion   Shaft Diameter</td>
<td class="xl65" width="160">3,17 mm - With Lock Surface</td>
</tr>
<tr height="20">
<td class="xl66" width="161" height="20">Overall   Shaft Length</td>
<td class="xl67" width="160">46.7 mm</td>
</tr>
<tr height="20">
<td class="xl64" width="161" height="20">Motor   Timing</td>
<td class="xl65" width="160">5deg</td>
</tr>
<tr height="20">
<td class="xl69" width="161" height="20">Drive   Frequency</td>
<td class="xl70" width="160">8kHz</td>
</tr>
</tbody>
</table>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x EOX 2214 - V2 Motor with preinstalled conector plug</p>
<p>4 x Hex Cup Screw M3x10</p>
<p> </p>
<p><span style="text-decoration: underline;">IMPORTANT USER INFORMATION:</span></p>
<p>The EOX-2214 - V2 motor is the ultimate powerhouse for your 300X. The  V2 edition is designed to increase the Max Output Power and work with  3S and 4S.</p>
<p>The high quality of all components and material used, as the choice of a special single wire rewind system grade this motor as a Limited Edition</p>
<p>Be careful to handle Lynx EOX motor to avoid personal injury, and install the motor following the need of your heli.</p>
<p>For any extra infomation please contact us by service ticket at WWW.LYNXHELI.COM</p>

Stock : 4 pcs
  $39.60 $49.50

Qty:  
<p>Lynx has defined OEM spec Carbon Steel Slant Pinions for the Gaui X3.</p>
<p>Our pinions are made with high-tensile strength carbon steel followed  by heat treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Slant Pinion 10T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>1x Set Screw M3x3</p>

Stock : 5 pcs
  $0.90 $4.55

Qty:  
<p>Lynx Heli Innovations are now producing high quality main blades!<br /> Trex 150 main blades "Pro" Edition are evolutions of the well know first edition.</p>
<p>FF-R stay for Fast Fly - Pro Edition</p>
<p>Why Lynx doing “bullet” main blade? What are the benefit flying that blade??</p>
<p>Adding a specific weight on the leading blade edge we can move the blade CG and get different blade timing position once is in fly condition.</p>
<p>Moving CG and change the timing of the main blade we can than change the blade specification in terms of precision, reaction speed.</p>
<p>Our “bulled” main blade was designed for fast fly performance, reducing a little the reaction speed compare the 3D Edition and give you more fly precision and more authority in wind conditions.</p>
<p>One more times Lynx redefine the standards with innovative products.</p>
<p> </p>
<p>Features:</p>
<p>- Stretch your T-Rex 150 from standard 120mm Main Blade to 125mm - Using Standard Tail Boom</p>
<p>- Extra Stability and Visibility - increasing 10mm disc diameter</p>
<p>- Extra Performance and Pops - increasing 10% rotor disk surface</p>
<p>- Perfect tracking</p>
<p>- Incredible stability</p>
<p>- Increased pitch response</p>
<p>- Increased efficiency</p>
<p>- "knife" precision in any 3D maneuvers</p>
<p>- New brighten colors</p>
<p>- Extreme crash and wear resistance.</p>
<p>- Super convenient 2 Sets package.</p>
<p>Thanks to our expert plastics consultant, we have optimized the weight and the rigidity using an exotic polymer blend.<br /> The blades features incredible material stability that guarantees   constant blade shape (no warping), even with extreme weather conditions   (very hot, very cold). The result is a stiff blade giving the best   helicopter performance under all conditions.<br /> When flying the Lynx   Trex 150 blades on your helicopter, you will immediately see the   precision of the rotor disc and the resulting accuracy and agility   during flight.</p>
<p>T-Rex 150 Main Blade was designed and test to be flyable until 8000 RMP.</p>
<p>Materials:<br /> Plastic Polymer Base PA66<br /> Specifications:<br /> Main blade  Trex 150<br /> Blade length:  125 mm -  Stretch + 5 mm<br /> Average single blade weight: 3.44 g</p>
<p>Pacage List:</p>
<p>2 Sets (4 main blades)  x T-Rex 150 Main Blade FF-R - 125 mm - Orange</p>
<p>Lynx Heli Innovations are now producing high quality main blades!<br /> Trex 150 main blades "Pro" Edition are evolutions of the well know first edition.</p>
<p>3D-R stay for 3D - Pro Edition</p>
<p>One more times Lynx redefine the standards with innovative products.</p>
<p> </p>
<p>Features:</p>
<p>- Perfect tracking</p>
<p>- Incredible stability</p>
<p>- Increased pitch response</p>
<p>- Increased efficiency</p>
<p>- "knife" precision in any 3D maneuvers</p>
<p>- New brighten colors</p>
<p>- Extreme crash and wear resistance.</p>
<p>- Super convenient 2 Sets package.</p>
<p> </p>
<p>Thanks to our expert plastics consultant, we have optimized the weight and the rigidity using an exotic polymer blend.<br /> The blades features incredible material stability that guarantees constant blade shape (no warping), even with extreme weather conditions (very hot, very cold). The result is a stiff blade giving the best helicopter performance under all conditions.<br /> When flying the Lynx Trex 150 blades on your helicopter, you will immediately see the precision of the rotor disc and the resulting accuracy and agility during flight.</p>
<p>T-Rex 150 Main Blade was designed and test to be flyable until 8000 RMP.</p>
<p>Materials:<br /> Plastic Polymer Base PA66<br /> Specifications:<br /> Main blade  Trex 150<br /> Blade length:  120 mm<br /> Average single blade weight: 3.18 g</p>
<p>Pacage List:</p>
<p>2 Sets (4 main blades)  x T-Rex 150 Main Blade 3D-R - 120 mm - Green</p>
<p>Lynx Heli Innovations reinforced GAUI X3 Carbon Fiber Ultra Tail Boom is now available and ready for action!</p>
<p><strong>IMPORTANTR NOTE: <span style="text-decoration: underline;">This GAUI X3 Carbon Fiber Tail Boom was designed over the GAUI X3 Belt conversion, will not work on Torque Tube transmission.</span></strong></p>
<p>Available in two lenght - standard and stretch to use with Lynx Stretch kit.</p>
<p>We designed and produced this new high quality Carbon Fiber and epoxy tail boom to be ultra-strong and stiff; with the outer dimension like the standard boom for perfect fitment without modification.  However, we reinforced the inner wall thickness making it incredibly stiff. This extra stiffness will help eliminate any last tail vibes without any added weight over the standard aluminum boom.</p>
<p>Major benefits in tail performance and vibration suppression but will also amaze you with its superior crash resistance.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement for your standard length GAUI X3 tail boom – Belt Edition</p>
<p>- Comparable weight to a standard aluminum boom but incredibly stronger and stiffer.</p>
<p>- Sleek modern aggressive look.</p>
<p>- Increased tail rigidity gives precise and crisp feeling flights with standard tail rotors.</p>
<p>- Superior crash resilience.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>- Tail Boom Material: Pure 3K Carbon Fiber OEM Lynx</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x GAUI X3 - Carbon Fiber Ultra Tail Boom – Standard Length – Belt Edition</p>

Stock : 4 pcs
  $6.38 $14.06

Qty:  
<p>Lynx has defined OEM spec Carbon Steel Slant Pinions for the Gaui X3.</p>
<p>Our pinions are made with high-tensile strength carbon steel followed by heat treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Slant Pinion 11T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>1 x Slant Pinion 12T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>1 x Slant Pinion 13T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>3 x Set Screw M3x3</p>
<p>Lynx define OEM Hard Steel Slant Pinion for T-Rex 500</p>
<p>Our pinions are made with high-tensile stretch carbon steel followed  by thermal treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>-         1 x Slant Pinion 12T Mod. 0.7 - 5mm Motor Shaft</p>
<p>-         2 x Set Screw M3x3</p>

Stock : 10 pcs
  $4.94 $7.05

Qty:  
<p>Lynx propose 360CFX/ 450X Ultra Landing Gear Skid Replacement Set as spare part for all Lynx 360CFX/ 450X – Ultra Landing Gear</p>
<p> </p>
<p>PACKING LIST:</p>
<p>- 2 x 360CFX/ 450X – Carbon Fiber Landing Gear Skids - Profile 1</p>
<p>- 4 x M2x5 Hex Cup Screw</p>
<p>- 4 x M2 “C” Washer Silver</p>
<p>Lynx Heli Innovations is always looking for a better way of doing things.</p>
<p>Here at Lynx Heli Innovations we are helicopter pilots and fly the same models you do.</p>
<p>From our test experience we decided to redesign special 200 SRX servo linkage rod for the best connection precision and wear resistence.</p>
<p>Lynx plastic linkage have special design and made with special POM  compound to achieve strongest, rigidity, ball retaining and incredible  wear resistance.</p>
<p>All those specification for so tiny but important component.</p>
<p>We offer a set with preassembly 4 servo linkages that support a fully update of all  your std 200 SRX linkage giving an extra set for spare, and experiment a next level of fly  precision.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement of standard Blade 200SRX parts.</p>
<p>- Special linkage designe can be inserted on both sides giving easily fine tune rod length for a perfectly level swash plate.</p>
<p>- Super precise fitting that remove any vibes and assure the best flight precision.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Thread Rod Material: Chrome Steel</p>
<p>- Plastic Ball Linkage material: Compound based POM + lubricant and molecular cohesion compounds.</p>
<p> </p>
<p> PACKING LIST:</p>
<p>4 x 200 SRX preassembled servo linkage rod</p>

Stock : 6 pcs
  $5.85 $8.88

Qty:  
<p>Here at Lynx Heli Innovations we are helicopter pilots and fly the same models you do.</p>
<p>The T-Rex 250 system can perform better if special rigid dampeners are used.</p>
<p>By combining our engineering and helicopter experience we have designed special dampeners that hold the spindle and reduce play to emphasize the semi-rigid head flight characteristics.</p>
<p>Our dampeners will increase the response and the fly precision in your T-Rex 250</p>
<p>These dampeners give your T-Rex 250 an incredibly precise feel in the air. The difference is visible, particularly in fast forward flight and with quick pitch changes.</p>
<p>Our tests show that T-Rex 250 Lynx dampeners are advised when high head speed is requested.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement for your T-Rex 250</p>
<p>- Increased head rigidity give precise and crispy fly feeling with standard plastic head or with any brand head upgrades parts.</p>
<p>- Quick move response for the ultimate 3D experience.</p>
<p>- Incredible spam life resistance.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>- Fine Adjustment Shims Washer: Brass</p>
<p>- Bushing Material: Techno-Polymer base POM.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>4 x Ultra Dampeners – Bushing</p>
<p>6 x Fine Adjustment Shims Washer</p>

Stock : 2 pcs
  $5.85 $6.50

Qty:  
<p>Lynx define OEM Hard Steel Slant Pinion for T-Rex 450</p>
<p>Our pinions are made with high-tensile stretch carbon steel followed by thermal treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>-         1 x Slant Pinion 12T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>-         1 x Set Screw M3x3</p>

Stock : 12 pcs
  $4.55 $5.50

Qty:  
<p>Lynx Heli Innovations introduce a reinforced OEM T-Rex 150 Carbon Fiber Ultra Tail boom, and introduce the stretch edition that is 15 mm longer.</p>
<p>We design and produce this new Carbon Fiber tail boom with the outer dimension as the standard boom for the best fit perfectly without modification, and we made it incredibly stiff. Using high quality carbon fiber and epoxy we are proud to introduce a stronger and stiff T-Rex 150 boom lighter than standard  aluminum one.</p>
<p>Major benefit are in tail performance, but even if lighter than standard one will surprise for the crash resistance.</p>
<p>Thamks the stretch edition is possible use longer blade 135 and 140 mm or usign standard blade get higer tail autority.</p>
<p>FEATURES:</p>
<p>-         Direct replacement for your T-Rex 150 tail boom, stretching the tail 15 mm.</p>
<p>-         Lighter than standard boom but incredibly stronger.</p>
<p>-         Increased tail system rigidity give precise and crispy fly feeling with standard tail motors.</p>
<p>-         Incredible crash resistance.</p>
<p>TECHNICAL SPECIFICATION:</p>
<p>-         Tail Boom Material: Pure Carbon Fiber OEM Lynx</p>
<p>-         Weight: 1.78g</p>
<p>PACKING LIST:</p>
<p>2 x Stretch T-Rex 150 Carbon Fiber Ultra Tail Boom (+ 15 mm)</p>
<p>Lynx produce super precise 130X Hardened Steel Tail transmission gear and offer spares parts for your service need.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Direct replacement for 130X Tail gears – not compatible with standard 130x gears</p>
<p>- Precise CNC produced and lightweight design</p>
<p>- Hardened Steel for the ultimate wear resistance</p>
<p>- Precise mesh adjustment with supply shims spacers.</p>
<p>- FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x 130X  Metal Gear Set “D"</p>

Stock : 3 pcs
  $5.19 $9.55

Qty:  
<p>Lynx Heli Innovations is always looking for a better way of doing things.</p>
<p>Here at Lynx Heli Innovations every detail has huge importance.</p>
<p>Looking on the 130X helicopter we discovery a quick wear of the brass pinion.</p>
<p>Using our material experience in pinion production we realize a series of pinion module 0.4 in Carbon Steel and followed by thermal process to increase the superficial hardness to assure the best wear resistance fly after fly without compromise and comparison.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Pinion Material: Carbon Steel + Thermal Process</p>
<p>- Direc replacement of your 130X std Brass pinion</p>
<p>- Motor Shaft Diameter 1.5 mm</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Pinion 13 Tooth – Mod. 0.4 mm Hard Steel</p>

Stock : 7 pcs
  $1.66 $2.56

Qty:  

Displaying 1 to 20 (of 25 specials) Result Pages:  1  2  [Next >>]