Need to order the Minimum of 15pcs each product !
<p>Lynx Heli Innovations are now producing high quality main blades!<br /> NANO-CPX main blades "Replica" Edition are evolutions of the well know first edition.</p>
<p>3D-R stay for 3D - Replica Edition</p>
<p>Thanks the great field experience Lynx made with first edition and  our continuously perfection research, we redesign the profile, the  centre of gravity position and we use new innovative compound that after  many test, made our  NANO-CPX Replica Edition Plastic blade one of the best  plastic main blade on actual market.</p>
<p>One more times Lynx redefine the standards with innovative products.</p>
<p>Our design target was made NANO-CPX main blade that can bit the first  edition style main blade, but the result surclass our expectation! All  of us and our beta tester was just astonished when we test it... and  after many compare with different blades material and model on the  market all together we promote the "Replica" edition as addictive  products: once you try it, will hard go back to previous models!</p>
<p>If you already tested the first edition you will amaze about the improvement was made in the "Replica" edition.</p>
<p>Few Features Comparison over first edition:</p>
<p>- Perfect tracking</p>
<p>- Incredible stability</p>
<p>- Increased pitch response</p>
<p>- Increased efficiency</p>
<p>- "knife" precision in any 3D maneuvers</p>
<p>- New brighten colors</p>
<p>- Extreme crash and wear resistance.</p>
<p>Thanks to our expert plastics consultant, we have optimized the weight and the rigidity using an exotic polymer blend.<br /> The blades features incredible material stability that guarantees  constant blade shape (no warping), even with extreme weather conditions  (very hot, very cold). The result is a stiff blade giving the best  helicopter performance under all conditions.<br /> When flying the  Lynx NANO-CPX blades on your helicopter, you will immediately see the  precision of the rotor disc and the resulting accuracy and agility  during flight.</p>
<p>Blade was designed and test to be flyable until 8000 RMP.</p>
<p>Materials:<br /> Plastic Polymer Base PA66<br /> Specifications:<br /> Main blade  NANO-CPX<br /> Blade length:  95 mm<br /> Average single blade weight: 1.30g</p>
<p> </p>
<p>Product Note: Actual Blade are Stretch edition, 95 mm, these stretch main blade need used with stretch tail boom only (LX0444).</p>
<p>Lynx propose 180CFX Ultra Landing Gear Support set as spare part for all Lynx 180CFX – Ultra Landing Gear</p>
<p> </p>
<p>PACKING LIST:</p>
<p>2 x 180CFX - Landing Gear Support - Red</p>
<p>4 x "C" Washer M1.6 - Black</p>
<p>4 x M1.6x4 Hex Cup Screw</p>
<p>4 x M1.6x4 Pan Head Screw – Self Tapping</p>

Stock : 2 pcs
  $7.35 $10.50

Qty:  
<p>Lynx Heli Innovations reinforced GAUI X3 Carbon Fiber Ultra Tail Boom is now available and ready for action!</p>
<p><strong>IMPORTANTR NOTE: <span style="text-decoration: underline;">This GAUI X3 Carbon Fiber Tail Boom was designed over the GAUI X3 Belt conversion, will not work on Torque Tube transmission.</span></strong></p>
<p>Available in two lenght - standard and stretch to use with Lynx Stretch kit.</p>
<p>We designed and produced this new high quality Carbon Fiber and epoxy tail boom to be ultra-strong and stiff; with the outer dimension like the standard boom for perfect fitment without modification.  However, we reinforced the inner wall thickness making it incredibly stiff. This extra stiffness will help eliminate any last tail vibes without any added weight over the standard aluminum boom.</p>
<p>Major benefits in tail performance and vibration suppression but will also amaze you with its superior crash resistance.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement for your standard length GAUI X3 tail boom – Belt Edition</p>
<p>- Comparable weight to a standard aluminum boom but incredibly stronger and stiffer.</p>
<p>- Sleek modern aggressive look.</p>
<p>- Increased tail rigidity gives precise and crisp feeling flights with standard tail rotors.</p>
<p>- Superior crash resilience.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>- Tail Boom Material: Pure 3K Carbon Fiber OEM Lynx</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x GAUI X3 - Carbon Fiber Ultra Tail Boom – Standard Length – Belt Edition</p>

Stock : 5 pcs
  $6.38 $12.75

Qty:  
<p>Lynx has defined OEM spec Carbon Steel Slant Pinions for the Gaui X3.</p>
<p>Our pinions are made with high-tensile strength carbon steel followed by heat treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Slant Pinion 11T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>1 x Slant Pinion 12T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>1 x Slant Pinion 13T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>3 x Set Screw M3x3</p>
<p>Lynx define OEM Hard Steel Slant Pinion for T-Rex 500</p>
<p>Our pinions are made with high-tensile stretch carbon steel followed  by thermal treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>-         1 x Slant Pinion 12T Mod. 0.7 - 5mm Motor Shaft</p>
<p>-         2 x Set Screw M3x3</p>

Stock : 5 pcs
  $4.94 $7.05

Qty:  
<p>Lynx Heli Innovations is always looking for a better way of doing things.</p>
<p>Here at Lynx Heli Innovations every detail has huge importance.</p>
<p>Looking at the 180CFX heli we discovered the brass pinion wears out too quick.</p>
<p>Using our materials experience in pinion production we realized a   series of pinion modulus 0.5 in Carbon Steel, followed by a heat   treatment process to increase the hardness to assure the best wear   resistance flight after flight without compromise or comparison.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Pinion Material: Carbon Steel + Heat Treatment Process</p>
<p>- Direct replacement of your 230S/ 200SRX std Brass pinion</p>
<p>- Motor Shaft Diameter 3 mm (STD motor)</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Pinion 10T – Mod 0.5 mm</p>
<p>1 x Pinion 11T – Mod 0.5 mm</p>
<p>Lynx Heli Innovations is always looking for a better way of doing things.</p>
<p>Using the finest precision high quality CNC finish, Lynx has produced  a Hardened Carbon Steel, special edition spindle shaft for the 300X/CFX.</p>
<p>We chose Carbon Steel followed by dedicated Thermal Treatment to achieve the higher strength module.</p>
<p>Lynx knows that the 300X/CFX is a high performance helicopter, requiring  some serious spindle shaft specifications, without compromise.</p>
<p>Small details make an important difference.</p>
<p>This spindle shaft will be a perfect upgrade for a ultimate power set-up in  your 300X/CFX.</p>
<p> </p>
<p>Spindle shaft material: Carbon Steel C40 + Thermal Treatment to 50 HRC Harness</p>
<p>Shims washer material: Carbon Steel</p>
<p>Screw material:  Chrome steel—DIN 7985</p>
<p>Assembly weight: 1.24g</p>
<p> </p>
<p>Packing list:  </p>
<p>1 x 300X/CFX Hardened Steel spindle shaft</p>
<p>2 x Washer 2x5 W0.5</p>
<p>2 x M2x6 Pan Head screw</p>

Stock : 10 pcs
  $4.03 $5.75

Qty:  
<p>Lynx propose 360CFX/ 450X Ultra Landing Gear Skid Replacement Set as spare part for all Lynx 360CFX/ 450X – Ultra Landing Gear</p>
<p> </p>
<p>PACKING LIST:</p>
<p>- 2 x 360CFX/ 450X – Carbon Fiber Landing Gear Skids - Profile 1</p>
<p>- 4 x M2x5 Hex Cup Screw</p>
<p>- 4 x M2 “C” Washer Silver</p>
<p>Lynx Heli Innovations is always looking for a better way of doing things.</p>
<p>Here at Lynx Heli Innovations we are helicopter pilots and fly the same models you do.</p>
<p>From our test experience we decided to redesign special 200 SRX servo linkage rod for the best connection precision and wear resistence.</p>
<p>Lynx plastic linkage have special design and made with special POM  compound to achieve strongest, rigidity, ball retaining and incredible  wear resistance.</p>
<p>All those specification for so tiny but important component.</p>
<p>We offer a set with preassembly 4 servo linkages that support a fully update of all  your std 200 SRX linkage giving an extra set for spare, and experiment a next level of fly  precision.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement of standard Blade 200SRX parts.</p>
<p>- Special linkage designe can be inserted on both sides giving easily fine tune rod length for a perfectly level swash plate.</p>
<p>- Super precise fitting that remove any vibes and assure the best flight precision.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Thread Rod Material: Chrome Steel</p>
<p>- Plastic Ball Linkage material: Compound based POM + lubricant and molecular cohesion compounds.</p>
<p> </p>
<p> PACKING LIST:</p>
<p>4 x 200 SRX preassembled servo linkage rod</p>

Stock : 7 pcs
  $5.85 $6.50

Qty:  
<p>Here at Lynx Heli Innovations we are helicopter pilots and fly the same models you do.</p>
<p>The T-Rex 250 system can perform better if special rigid dampeners are used.</p>
<p>By combining our engineering and helicopter experience we have designed special dampeners that hold the spindle and reduce play to emphasize the semi-rigid head flight characteristics.</p>
<p>Our dampeners will increase the response and the fly precision in your T-Rex 250</p>
<p>These dampeners give your T-Rex 250 an incredibly precise feel in the air. The difference is visible, particularly in fast forward flight and with quick pitch changes.</p>
<p>Our tests show that T-Rex 250 Lynx dampeners are advised when high head speed is requested.</p>
<p> </p>
<p>FEATURES:</p>
<p>- Direct replacement for your T-Rex 250</p>
<p>- Increased head rigidity give precise and crispy fly feeling with standard plastic head or with any brand head upgrades parts.</p>
<p>- Quick move response for the ultimate 3D experience.</p>
<p>- Incredible spam life resistance.</p>
<p> </p>
<p>TECHNICAL SPECIFICATION:</p>
<p>- Fine Adjustment Shims Washer: Brass</p>
<p>- Bushing Material: Techno-Polymer base POM.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>4 x Ultra Dampeners – Bushing</p>
<p>6 x Fine Adjustment Shims Washer</p>

Stock : 9 pcs
  $5.85 $6.50

Qty:  
<p>Accurate swash plate alignment is required for optimum FBL performance. This alignment can only be assessed with precise tools.<br />Lynx Heli Innovations has designed a dedicated swash plate leveler for your T-Rex 150.<br />We  combine lightweight, exotic materials and stylish design with high  tolerance production, resulting in a tool to achieve precise set-up of  your helicopter.</p>
<p>FEATURES:<br />- Dedicated design for T-Rex 150 helicopter<br />- Precise dimensions and tolerance for the best main shaft fitting<br />- Help and support superior heli swashplate set up.<br />- FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.</p>
<p>TECHNICAL SPECIFICATION:<br />- Material: Aluminum Alloy 7075-T6<br />- Weight : 2.5g</p>
<p>PACKING LIST:<br />1 x T-Rex 150 – Swashplate leveler tool</p>

Stock : 8 pcs
  $7.38 $8.20

Qty:  
<p>Lynx define OEM Hard Steel Slant Pinion for T-Rex 450</p>
<p>Our pinions are made with high-tensile stretch carbon steel followed by thermal treatment to achieve the best mechanical and wear resistance.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>-         1 x Slant Pinion 12T Mod. 0.6 - 3.17 mm Motor Shaft</p>
<p>-         1 x Set Screw M3x3</p>

Stock : 12 pcs
  $4.55 $5.05

Qty:  
<p>Lynx Heli Innovations is always looking for a better way of doing things.</p>
<p>Here at Lynx Heli Innovations every detail has huge importance.</p>
<p>Looking at the 200SRX heli we discovered the brass pinion wears out too quick.</p>
<p>Using our materials experience in pinion production we realized a   series of pinion modulus 0.5 in Carbon Steel, followed by a heat   treatment process to increase the hardness to assure the best wear   resistance flight after flight without compromise or comparison.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Pinion Material: Carbon Steel + Heat Treatment Process</p>
<p>- Direct replacement of your 200SRX std Brass pinion</p>
<p>- Motor Shaft Diameter 3 mm (STD motor)</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Pinion 14T – Mod 0.5 mm</p>

Stock : 18 pcs
  $3.78 $4.20

Qty:  
<p>Lynx Heli Innovations introduce a reinforced OEM T-Rex 150 Carbon Fiber Ultra Tail boom, and introduce the stretch edition that is 15 mm longer.</p>
<p>We design and produce this new Carbon Fiber tail boom with the outer dimension as the standard boom for the best fit perfectly without modification, and we made it incredibly stiff. Using high quality carbon fiber and epoxy we are proud to introduce a stronger and stiff T-Rex 150 boom lighter than standard  aluminum one.</p>
<p>Major benefit are in tail performance, but even if lighter than standard one will surprise for the crash resistance.</p>
<p>Thamks the stretch edition is possible use longer blade 135 and 140 mm or usign standard blade get higer tail autority.</p>
<p>FEATURES:</p>
<p>-         Direct replacement for your T-Rex 150 tail boom, stretching the tail 15 mm.</p>
<p>-         Lighter than standard boom but incredibly stronger.</p>
<p>-         Increased tail system rigidity give precise and crispy fly feeling with standard tail motors.</p>
<p>-         Incredible crash resistance.</p>
<p>TECHNICAL SPECIFICATION:</p>
<p>-         Tail Boom Material: Pure Carbon Fiber OEM Lynx</p>
<p>-         Weight: 1.78g</p>
<p>PACKING LIST:</p>
<p>2 x Stretch T-Rex 150 Carbon Fiber Ultra Tail Boom (+ 15 mm)</p>
<p>Lynx Heli Innovations has redesigned the standard Nano CPX plastic  Head Center Hub, using aluminum alloy, and we combo with Titanium Lynx  Main Shaft.</p>
<p>This micro part assembly will add precision and shock resistance to your Nano CPX heli.</p>
<p><span style="text-decoration: underline;">Why Lynx sale the Head Center Hub in combo with the main shaft??</span></p>
<p>During out intensive design test we immediately discovery a weak and  dangerous point once Aluminum CNC center Hub are installed into standard  Nano CPX main shaft.</p>
<p>Standard main shaft is designed to fit into plastic hub and have two  parallel slots that fit and lock the rotation in the plastic hub. Those  surfaces are NOT designed to fit in the CNC center hub and can  compromise the assembly lock with risk of dangerous center hub in-fly  disassembly.</p>
<p>For us security first and we design a special shaft for CNC center hub.</p>
<p>Lynx shaft is specifically designed for Lynx Head Center Hub and have  special slot that assure the clamp and the perfect lock assembly.  Pictures below had shown the difference between Lynx special shaft and  standard main shaft slots.</p>
<p>Micro helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight.</p>
<p>We spent time optimizing the design and fly testing to achieve the  required strength with a final weight beyond compromise. We are pilots,  and we demand a light helicopter.</p>
<p>Details and design combined with strength, durability, accurate CNC  tolerances, finish, and most important lightweight, will increase and  assure flight precision, flight after flight, adding top performance in  your Nano.</p>
<p>Lynx Nano upgrade design the new frontier of lightweight and high precision upgrade parts for sub micro helicopters.</p>
<p>FEATURES:</p>
<p>-         Precision and higher tensile stretch increase fly precision and parts durability</p>
<p>-         Direct replacement for the standard Nano part</p>
<p>-         Lynx shaft specially designed for CNC Center Hub clamp and best assembly lock.</p>
<p>-         Special set combo Head Center Hub with Main Shaft for the best in-fly user security.</p>
<p>-         FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.</p>
<p>TECHNICAL SPECIFICATION:</p>
<p>-         Head Center Hub Material: Aluminum 7075-T6 – Silver anodized finish</p>
<p>-         Main Shaft material: Titanium G6</p>
<p>-         Main Shaft Collar Material: Aluminum 7075-T6 – Silver anodized finish</p>
<p>-         Hardware Material: Carbon Steel</p>
<p>-         Assembly weight: (Head Center Hub Assy: 0.41g + Main shaft Assy 0.69g ) – Tot.: 1.10g</p>
<p>PACKING LIST:</p>
<p>-         1 x Nano CPX CNC Head Center Hub – Silver anodize</p>
<p>-         1 x Nano CPX Lynx Main Shaft Titanium with Collar assembled</p>
<p>-         3 x Pan Head screw M1.4x3 (2 assembled + 1 as spare part)</p>
<p>Lynx Heli Innovations are now producing high quality tail blades!<br />Our 300X/CFX tail blades have been designed from scratch to be the best tail blade possible on this helicopter.<br />Thanks to our expert plastics consultant, we have optimized the weight and the rigidity using an exotic polymer blend.<br />The  blades features incredible material stability that guarantees constant  tail blade shape (no warping), even with extreme weather conditions  (very hot, very cold). The result is a stiff tail blade giving the best  tail performance under all conditions and fly style.<br />When flying the  Lynx 300X/CFX tail blade blades on your helicopter, you will immediately  feel tail precision and vibes-free, situations that will achieve the  best fly performance.<br />Lynx tail blade have higher efficacy compared  standard blade than we recommend reduce and adjust tail gyro gain as  need to avoid tail wagging.<br />Materials:<br />Plastic Polymer Base PA66<br />Specifications:<br />Tail blade  300X/CFX<br />Tail Blade length:  47 mm<br />Average single tail blade weight: 0.21g</p>
<p>Lynx Heli Innovations are now producing high quality main blades!<br /> 130X main blades "Replica" Edition are evolutions of the well know first edition.</p>
<p>3D-R stay for 3D - Replica Edition</p>
<p>Thanks the great field experience Lynx made with first edition and our continuously perfection research, we redesign the profile, the centre of gravity position and we use new innovative compound that after many test, made our 130x Replica Edition Plastic blade one of the best plastic main blade on actual market.</p>
<p>One more times Lynx redefine the standards with innovative products.</p>
<p>Our design target was made 130X main blade that can bit the first edition style main blade, but the result surclass our expectation! All of us and our beta tester was just astonished when we test it... and after many compare with different blades material and model on the market all together we promote the "Replica" edition as addictive products: once you try it, will hard go back to previous models!</p>
<p>If you already tested the first edition you will amaze about the improvement was made in the "Replica" edition.</p>
<p>Few Features Comparison over first edition:</p>
<p>- Perfect tracking</p>
<p>- Incredible stability</p>
<p>- Increased pitch response</p>
<p>- Increased efficiency</p>
<p>- "knife" precision in any 3D maneuvers</p>
<p>- New brighten colors</p>
<p>- Extreme crash and wear resistance.</p>
<p> </p>
<p>Thanks to our expert plastics consultant, we have optimized the weight and the rigidity using an exotic polymer blend.<br /> The blades features incredible material stability that guarantees constant blade shape (no warping), even with extreme weather conditions (very hot, very cold). The result is a stiff blade giving the best helicopter performance under all conditions.<br /> When flying the Lynx 130X blades on your helicopter, you will immediately see the precision of the rotor disc and the resulting accuracy and agility during flight.</p>
<p>Blade was designed and test to be flyable until 7000 RMP.</p>
<p>Materials:<br /> Plastic Polymer Base PA66<br /> Specifications:<br /> Main blade  130X<br /> Blade length:  135 mm<br /> Average single blade weight: 3.4g</p>
<p>Lynx produce super precise 130X Hardened Steel Tail transmission gear and offer spares parts for your service need.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Direct replacement for 130X Tail gears – not compatible with standard 130x gears</p>
<p>- Precise CNC produced and lightweight design</p>
<p>- Hardened Steel for the ultimate wear resistance</p>
<p>- Precise mesh adjustment with supply shims spacers.</p>
<p>- FEA (Final Elements Analysis) assisted, achieve lightweight and maximum strength.</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x 130X  Metal Gear Set “D"</p>

Stock : 3 pcs
  $5.19 $7.98

Qty:  
<p>Lynx Heli Innovations is always looking for a better way of doing things.</p>
<p>Here at Lynx Heli Innovations every detail has huge importance.</p>
<p>Looking on the 130X helicopter we discovery a quick wear of the brass pinion.</p>
<p>Using our material experience in pinion production we realize a series of pinion module 0.4 in Carbon Steel and followed by thermal process to increase the superficial hardness to assure the best wear resistance fly after fly without compromise and comparison.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Pinion Material: Carbon Steel + Thermal Process</p>
<p>- Direc replacement of your 130X std Brass pinion</p>
<p>- Motor Shaft Diameter 1.5 mm</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Pinion 13 Tooth – Mod. 0.4 mm Hard Steel</p>

Stock : 7 pcs
  $1.66 $2.55

Qty:  
<p>Lynx Heli Innovations is always looking for a better way of doing things.</p>
<p>Here at Lynx Heli Innovations every detail has huge importance.</p>
<p>Looking on the 130X helicopter we discovery a quick wear of the brass pinion.</p>
<p>Using our material experience in pinion production we realize a series of pinion module 0.4 in Carbon Steel and followed by thermal process to increase the superficial hardness to assure the best wear resistance fly after fly without compromise and comparison.</p>
<p> </p>
<p>TECHNICAL SPECIFICATIONS:</p>
<p>- Pinion Material: Carbon Steel + Thermal Process</p>
<p>- Direc replacement of your 130X std Brass pinion</p>
<p>- Motor Shaft Diameter 1.5 mm</p>
<p> </p>
<p>PACKING LIST:</p>
<p>1 x Pinion 12 Tooth – Mod. 0.4 mm Hard Steel</p>

Stock : 6 pcs
  $1.66 $2.55

Qty:  

Displaying 21 to 40 (of 45 specials) Result Pages: [<< Prev]   1  2  3  [Next >>]